Devices, Modulators, and Other Signal Achievements
Devices are special-function components that extend your signal paths by modifying or transforming incoming notes or audio signals.
Every track has a device chain. In terms of signal flow, this device chain falls between the incoming sequencer data and the track's mixing board section. In this device chain you can insert as many devices as you like. You can even use Bitwig's devices to create additional device chains.
Each device has parameters, which are settings that determine how that device operates. Parameters are set directly within the device's interface or via an assigned MIDI controller. Parameter values can also be sequenced via automation, adjusted via the device's remote controls, or manipulated by modulators, which are special-purpose modules that can be loaded within any device.
Devices are grouped into the following descriptive categories:
Analysis. Devices that merely visualize the signals that reach them. They make no effect on the audio chain they are a part of.
Audio FX. Devices that manipulate incoming audio signals before passing them onward.
Container. Utility devices whose primarily function is to host other devices.
Delay. Delay line-based processors that operate on their incoming audio signals.
Destruction. Distortion and other mangling processors that operate on their incoming audio signals.
Drum. Individual drum piece emulators that use incoming note messages to synthesize audio.
Dynamic. Processors that operate on their incoming audio signals, based off of those signals' amplitude levels and trends.
EQ. Sets of frequency-specific processors that operate on their incoming audio signals.
Filter. Frequency-specific processors that operate on their incoming audio signals.
Hardware. Interface objects for sending signals and/or messages to devices beyond Bitwig Studio (such as hardware synthesizers and effect units, etc.). This can include transmitting and/or receiving audio signals, control voltage (CV) signals, and clock messages.
Keyboard. Keyboard instrument emulators that use incoming note messages to synthesize audio.
MIDI. Transmitters for sending various MIDI messages via the track's device chain. This is useful for sending messages to plug-ins or to external hardware (when used in conjunction with Bitwig's hardware devices).
Note FX. Devices that manipulate incoming note messages before passing them onward.
Reverb. Time-based processors that operate on their incoming audio signals.
Routing. Devices that divert a track's signal path, allowing signals to exit and/or reenter the track.
Synth. Synthesizer instruments that either generate their audio from rudimentary source material or use audio samples. Incoming note messages are used to synthesize audio.
The Grid. Devices utilizing The Grid, Bitwig's modular sound-design environment (see chapter 16: Welcome to The Grid).
Utility. An assortment of devices sporting various, basic functionality. This includes basic note message processors as well as simple signal generators and processors.
All device chains in Bitwig Studio support both audio and note signals. To keep these signals accessible, a few rules apply.
Except for note FX devices, all devices receiving note signals pass them directly to their output. (Note FX process the incoming notes before passing them onward.)
Except for audio FX devices, all devices receiving audio signals pass them to their output. (Audio FX process the incoming audio before passing them onward.)
Many Bitwig devices possess a Mix parameter. Similar to a "wet/dry" fader, this control blends the raw audio that entered the device into the device's output.
In Bitwig Studio, all audio signal paths are stereo.
- 0. Welcome to Bitwig Studio
- 1. Bitwig Studio Concepts
- 2. Anatomy of the Bitwig Studio Window
- 3. The Arrange View and Tracks
- 4. Arranger Clips and the Browser Panel
- 5. The Clip Launcher
- 6. The Mix View
- 7. Introduction to Devices
- 8. Automation
- 9. Working with Audio Events
- 10. Working with Note Events
- 11. Operators, for Animating Musical Sequences
- 12. Going Between Notes and Audio
- 13. Working with Projects and Exporting
- 14. MIDI Controllers
- 15. Advanced Device Concepts
- 16. Welcome to The Grid
- 17. Working on a Tablet Computer
- 18. Device Descriptions
- 19. Credits